Tennis Geometrics Power V-Grip:  Installation

Intro | Delivery | Installation | Wrapping it Up | Impressions

My racquet had the manufacturer grip plus an overwrap for moisture absorption.  After removing both, the bare handle was revealed.

Next, I removed the adhesive strip under the Power V-Grip (aka Wonder Wedge).   I then placed it on bevel #3, lined up the straight edge of the wedge to the edge of the butt cap, and pressed it on to the racquet.  The adhesive under the wedge attached it to the butt cap and the handle.

Notice in the following pictures below that the wedge is on top of the butt cap.  This is what TennisGeometrics recommend.  Someone however has actually cut a notch on the butt cap so that the wedge sits flush on the grip handle all the way through the edge of the butt cap.