Price

Direct View Tube – CRT

Tier1
$225

• Grayscale calibration with Colour Analyzer on one input signal type of client’s choice. (Composite / S-Video / 480i / 480p / 1080i / 720p)
• Establish optimal Brightness / Contrast / Colour / Tint / Sharpness settings
• Center all five settings within service menu where applicable
• Provide product specific Before vs. After chart for customer reference
• Adjust colour decoder (where applicable)

Tier 2
$300

• Grayscale calibration for one additional input signal type. (S-Vid. / 480i / 480p / 720p / 1080i)
• Disconnect / Disable Scan Velocity Modulation circuit (where applicable)

Rear Projection TV - CRT type

Tier 1
$275

• Same as Direct View set Tier 1
• Touch up image convergence on primary viewing mode

Tier 2
$400

• All Tier 1 services where applicable
• Disconnect / Disable Scan Velocity Modulation circuit (where possible)
• Removal / Restack of protective screen
• Electronic & Mechanical focus
• Minor geometry corrections via service mode (by eye)
• Proprietary Herman-TLV Maneuver for improved detail
• Adjust image overscan and position where applicable
• Lens Striping for improved colour consistency
• Adjust Colour decoder (where applicable)

Tier 3
$550

• All Tier 2 services where applicable
• Convergence of HDTV input
• Optimized Grayscale for one additional input type. (S-video / 480i / 480p / 720p / 1080i)

Tier 4

$750

• All Tier 3 services where applicable
• Create a 16:9 HDTV aspect ratio for the HD section on selected Toshiba 4:3 HDTV’s.

Front Projection TV - CRT type

Tier 1
$325

• Same as Direct View sets Tier 1

Tier 2
$550

• All Tier 1 services where applicable
• Convergence and overscan adjustments for one primary aspect ratio
• Set up proper Grayscale for one additional aspect ratio

Tier 2
$650

• All Tier 2 services where applicable
• Set up proper Grayscale for one additional aspect ratio

Plasma Panel

• Same as Direct View sets Tier 1

DLP/LCD FPTV

• Same as Direct View sets Tier 1