[HD RECEPTION][SET TOP
BOX][RCA DTC-100]
<< Back to DTC-100 Tips
Changing the Gray Bars to Black
Display the on-screen menu, then do the following:
- Assistance (7)
- Monitor Setup (8)
- Gray Bar (1)
You can use the Power Lock feature to keep the DTC on at all times since the gray
appears to change back to black when the DTC is powered down or unplugged.
The Power Lock feature should be in the service menu. If not, press the INFO and
DOWN buttons on the front panel of the unit (not the remote) simultaneously to get to
it. You can also get to the service menu via advanced code 074 on a One4All remote.
If you have pre-4.0+ software on your DTC, you'd have to do the following:
Press the INFO and DOWN buttons on the front panel of the unit (not the remote)
simultaneously. The gray bar selection menu should then appear.
Caution: Note that changing the
gray bars to black could cause burn-in
on the tv set. Reducing contrast should help reduce the possibility of burn-in. |
